Portable Ultrasonic Flowmeter

Product Options
Flow Profile

Portable Ultrasonic Flowmeter


Suitable for Water, Sea Water, Oil, the PORTAFLOW-C is a portable type ultrasonic flowmeter using the transit time measuring method, with a clamp-on type detector.

More details

PORTAFLOW-C is a portable type ultrasonic flowmeter using the transit time measuring method, with a clamp-on type detector. Suitable for Pipes from DN15 to DN2000. This allows you to complete site flowmetering surveys with the minimum amount of equipment and store all of your results on memory card for analysis on your office PC.

The Portaflow-C flow meter is a non intrusive, non evasive clamp-on ultrasonic flow meter, which is suitable for measuring the flow and total flow of liquids in closed pipes. It is particularly useful where high accuracy is required and the flow meter needs to be installed without shutting down the process. The Portaflow C is the latest release in the Fuji Electric flow metering range and uses the Micro processor and digital signal processing technology to provide a compact, lightweight solution with accuracies that are better than 1% of Flow rate.

Portaflow is quick and easy to set up and is ideal for flow surveys. if you need an ultrasonic flowmeter for hire, Portaflows allows you to try before you buy at competitive weekly or monthly hire rates. For more details on hire charges Why not call us.

Ideal for Water, diesel and heating oil.

  • New 4,7 inch colour graphic display -All the parameters are available via an easy and friendly operator interface,
  • Compact and lightweight -Size and weight have been reduced by 30% in comparison with the previous model - now only 120x210x65mm and 1 Kg !
  • IP64 protection -The flow meter is water resistant and tolerates exposure to rain
  • Long time battery operation -Designed for 12 hours of continuous operation with its own built-in battery
  • USB communication -A universal USB port permits communication with PC compatible user-friendly PC loader software -It allows the configuration, to save and load all the parameters of the converter. It also allows reading and saving of data logger files onto a computer
  • Large capacity storage on SD memory card -Flow, velocity and total data can be stored in SD memory card (data logger function). Files are saved as csv files, directly compatible with MS-Excel software
  • Heat quantity measurement -This function calculates the heat quantity received and sent with liquid (water) in cooling and heating. Two 4-20mA inputs are available for temperature measurements
  • Flow velocity profile measurement(option) -Flow profile can be monitored in real time. Pulse doppler method with specific sensors model FSD is used

Typical Applications

This flowmeter is suitable for measuring:

Boiler feed water
Cooling water
Clean in place (CIP) spray systems
Fruit juice
Drinking water
Injectable water

The above fluids can be measured over a wide range of process conditions including very low and very high pressure. Fluid temperatures can also be on a range of -40 to +200 deg C.

    • 0 to ±105ft/s (0 to ±32m/s) flow velocity range
    • 0.5 to 235in (13 to 6000mm) pipe diameter range
    • ±1% of rate accuracy
    • Quick response mode, 0.2 sec or less
    • Superior anti-bubble performance
    • 10,000mg/L max fluid turbidity
    • 4-20mA DC analog output
    • 2 open collector transistor digital outputs
    • RS-485 MODBUS communication optional
    • Advanced digital signal processing
    • Back-lit LCD display
      • 2 lines of 16 character each
      • Includes flow velocity, bi-directional rate and total
    • 100 to 240VAC or 20 to 30VDC power supply options
    • Loader software for programming and diagnostics
    • NEMA 4X (IP66) rating (NEMA6/IP67 is optional)