RS232/485 to Industrial Ethernet Converter E-PORT

RS232/485 to Industrial Ethernet Converter E-PORT

New

The E-PORT Ethernet Gateway module provides a straight forward method of connecting almost any device with serial communications to a new or existing Ethernet.

More details

Industrial Ethernet Modules


Industrial Interface range of Ethernet modules allow virtually any process control variable or equipment to be connected to an Industrial Ethernet Network.

 

RS232/485 to Industrial Ethernet Converter 

The E-PORT Ethernet Gateway module provides a straight forward method of connecting almost any device with serial communications to a new or existing Ethernet.

The unit obtains the relevant data from the serial device and stores these values before forwarding them on demand to the Ethernet network.

This enables limited distance serial RS232 or 485 communication links to be extended throughout the installation or onto the web.

  • Enables existing equipment with RS232 comms to link to Ethernet Networks
  • MODBUS TCP Protocol Stack, other protocols available
  • 10/100 Mbps Ethernet (RJ45)
  • Useful local display

    RS232/485 to Industrial Ethernet Converter 

     

    ParameterMinTypMaxComments 
    Supply Voltage 16 24V 30    
    Supply Current (mA) 65   140 24 V dc supply  
    Serial Interface   RS232   RS485 or 422 options  
    Data rates   2400   300 to 115,200 baud  
    Data Bits   7 or 8      
    Parity       Odd / even / none  
    Ethernet Interface       10Base-T or 100Base-T  
    Connector   RJ45      
    Protocols       TCP/IP UDP/IP etc  
    Temp Coefficient     ±100ppm/ºC    
    Operating Ambient 0ºC   70ºC    
    Relative Humidity 0%   90%    
    Isolation Voltage see note 1 1kV        
    Surge Voltage 2.5kV for 50μS Transient of 10kV/μS  
    Notes Local LED display can be used to display RS232 variables Figures based on 24 Vdc supply 20 degC ambient.  
    Conditioner type Industrial Ethernet

24 other products in the same category: