> Home>Signal Conditioners>Analogue to Industrial Ethernet Converter E-100

Analogue to Industrial Ethernet Converter E-100

Analogue to Industrial Ethernet Converter E-100

New

The E-100 Ethernet Gateway module provides a straight forward method of interfacing analogue and digital process parameters to an Ethernet network. 

More details

Industrial Ethernet Modules


Industrial Interface range of Ethernet modules allow virtually any process control variable or equipment to be connected to an Industrial Ethernet Network.

Analogue to Industrial Ethernet Converter

The E-100 Ethernet Gateway module provides a straight
forward method of interfacing analogue and digital process
parameters to an Ethernet network. The E-100 allows the
user to view the status of the individual inputs via the front
panel display.

The E-100 unit has one universal analogue input but the
system can be expanded through the use of the optional
ISO-SLICE slice I/O modules.

  • MODBUS TCP Protocol Stack
  • Other Protocols available
  • Universal Configurable Analogue Input
  • Slice I/O system for additional I/O
  • High Accuracy, Low Cost


    Analogue to Industrial Ethernet Converter

     

    ParameterMinTypMaxComments
    Supply Voltage 16 24V 30  
    Supply Current (mA) 65   140 24 V dc supply
    Input Impedance (Volt)   1MΩ    
    Input Impedance( mA)   15Ω    
    Volt drop (mA input)   0.3   At 20mA input
    Output Linearity Error   ±0.01% ±0.05%  
    Temp Coefficient     ±100ppm/ºC  
    Operating Ambient 0ºC   55ºC  
    Relative Humidity 0%   90%  
    Isolation Voltage see note 1 1kV      
    Surge Voltage 2.5kV for 50μS Transient of 10kV/μS  
    Notes The process input level is shown on the 4 digit LED display. Figures based on 24 Vdc supply 20 degC ambient.  
    Conditioner type Industrial Ethernet

24 other products in the same category: