Bailey & Mackey High Range Pressure Switch Type 1581

Product Options
Ranges
Wetted Parts
Process Connection
Mounting Bracket
Set-Point Adjustment
Calibration Certificate
Options

Bailey & Mackey High Range Pressure Switch Type 1581

New

Low cost, reliable, and robust high range gauge pressure switch available in a number of setting ranges from 9 Bar up to 400 Bar. Single switch output version with fixed switching hysteresis. Available with wetted parts to suit most fluids. LPCB approved.

More details

This pressure switch can be used for all applications where an electrical switch is required to close or open at a pre-set pressure. The robustness of these pressure switches enables most applications to be satisfied. All connecting treads used in industry are available including British, American and metric. Flanged fittings are available.

 

  • LPCB Approved
  • UL508 Certified
  • CE Marked for all applicable directives
  • Fully Adjustable
  • IP65 Enclosure
  • Well Proven Robust and Reliable Performance
  • Wetted Parts for Most Fluids
  • Single & Twin Circuit Versions Available (see type 2381 for twin output)
  • High Overload Pressure Versions Available

    Materials of Construction 

    Piston   Stainless Steel

    Seal   Nitrile / PTFE 

    Base   Stainless Steel

    Housing   Aluminium / Zinc diecast

    Cover   Glass Filled Nylon with Nitrile seal

    Maximum Pressure  

    To ensure long service life select the pressure range as follows:

    Dynamic pressure applications Pmax = 75% of Range

    Static pressure applications Pmax = 100% of Range

    Maximum pressure that can be applied is 125% of pressure range.

    Higher overload version available if required.

    Electrical Ratings 

    10 amp at 250V 50 Hz Inductive load

    1 amp at 30V dc Inductive load

    For other voltages and currents please consult our technical department.

    Setting Accuracy 

    ±2%

    Temperature Range 

    –10 to +85 ºC (Process fluid must not solidify)

    Temperature Coefficient 

    0.05 % of range per ºC from 20 ºC

    Alternative Wetted Parts 

    Switches with standard wetted parts above are suitable for

    applications using air, nitrogen, inert gasses, oils, water & steam.

    Alternatives are available for use with other fluids.

    Ranges : 

    Pressure Range Hysteresis Typical
    9 to 100 Bar 10 Bar
    14 to 200 Bar  18 Bar
    20 to 400 Bar 25 Bar

    Alternative Wetted Parts: 

    Contact our sales office for details

    Direct switching of electrical loads at a pre-set pressure for alarm or control purposes.

    Versions for liquid or gaseous media, even in aggressive environments

    Versions for use with viscous, chemically aggressive or contaminated media.

    Pump Control

    Hydraulic Systems

    Fire Suppression Systems ( LCPB Approved)

    Heating & ventilating Systems

    Water Treatment

    General Industrial Plant

    This section is currently under construction.

    Model numbers were redesignated during the 1990's.

    The following table gives the current replacement model for each of the original model numbers:

    Original Model Number New Model Number
    107 or 108 1381
    157 or 167 1481
    115 or 1351 1581
    207 or 208 2381
    257 or 267 2481
    215 2581
    117 or 118 1382
    167 1482
    120P 1392P

    Option code letters such as "V" or "Q" etc which were used with the original model numbers are still applied to the new model numbers in the same way.

    Examples : Original model 107V = New model 1381V

    Original model 207Q = New model 2381Q

    A repair service is available for this product. However, as a relatively low cost product it is generally cheaper to replace with a new unit. Please call us or e-mail for details.

    This section is currently under construction.

6 other products in the same category: