Categories
List of products by manufacturer Industrial Interface
-
10W and 30W Isolated Mains Power Supply Unit
The power supply is a mains input, DC output DIN rail mounted power supplies. A wide range (90 to 264Vac) as standard.
-
15W DC-DC Converter
The unit is typically used to provide a clean, isolated 24Vdc auxiliary power supply for panel based systems. In this case the output 0V terminal can be left disconnected, using the output +ve and -ve instead.
-
20-ALM Loop powered trip amplifier
The 20-ALM is a 4-20mA direct current loop powered trip amplifier. The device derives its power from the input signal and therefore requires no external power supply.
-
2002ALM-HL Dual Trip Amplifier
The new 2002-HL trip amplifier can accept a wide range of user configurable inputs including 4-20mA, 0-20mA, 0-5V and 0-10V. The unit can have up to two relay outputs and each can operate as a high or a low trip; alternatively latching operation using both trip points can be configured.
-
2002ALM-TC/RTD Dual Trip Amplifier
The 2002-ALM family of trip-amplifiers can accept a wide range of inputs including Thermocouple and RTD. The unit can have up to two relay outputs and each can operate as a high or a low trip.
-
24VA Isolated Mains Power Supply Unit
The PSU range is a family of mains input, DC output DIN rail mounted power supplies. 115 and 230 Vac input options are available with an output voltage of 24Vdc as standard.
-
3-Port Isolation Signal Converter ISOCON
This Isolating Signal Converter can accept a wide range of inputs including 4-20mA, thermocouple, RTD and voltage signals.
-
-
Ambient Temperature and RH ZigBee Transmitter Z-TEMP
The Z-TEMP ambient temperature and humidity transmitter has been designed to operate with the range of ZigBee components manufactured by Industrial Interface.
-
Analogue to Industrial Ethernet Converter E-100
The E-100 Ethernet Gateway module provides a straight forward method of interfacing analogue and digital process parameters to an Ethernet network.
-
CAN bus to RS232 ASCII Gateway CAN-PORT
This enables CAN bus data to be captured in real time and either logged using an RS232 data logger or to be made available on a Web site for remote logging and monitoring.
-
Chameleon Programmable function converter
The CHAMELEON product range can perform intelligent trip functions including delay before trip, trip for a minimum time interval, trip on sensor fail, trip on internal system failure, trip only if a specified sequence of events occurred, etc. If you have a complex trip function contact us first to see if we can help.
-
Industrial Ethernet Infrastructure Products
Switches include ports for copper and fibre and redundant ring configurations, remote monitoring of switch performance and ESD protection are all featured in these products.
-
Isolated Bus Input/Output System ISO-SLICE
The ISO-SLICE isolated Bus I/O system combines full three-port isolation with access to an industrial bus.
-
Isolated Mains Power Supply Unit
The power supply is a mains input, DC output DIN rail mounted power supplies. A wide range (85 to 264Vac) mains voltage input is standard with an output voltage of 24Vdc as standard.
-
Isolating Signal Converter with Two Outputs DUALCON
Signal converter with independent and isolated outputs which can be configured separately.
-
Point to Point Wireless Ethernet Bridge E-BRIDGE
The E-BRIDGE wireless Ethernet cable replacement system provides a simple way extending the range of an Ethernet network without expensive wiring.
-
RS232/485 to Industrial Ethernet Converter E-PORT
The E-PORT Ethernet Gateway module provides a straight forward method of connecting almost any device with serial communications to a new or existing Ethernet.
-
Slim Isolated Signal Converter SLIM-CON
This slim unit can accept a range of inputs including 4-20mA and voltage signals. The unit produces an isolated high level DC output of either voltage or current.
-
The 4002ALM-6 24Vdc Dual Trip Amplifier
The 4002ALM-6 trip amplifier can accept a wide range of inputs including 4-20mA, thermocouple, RTD and voltage.