This Isolating Signal Converter can accept a wide range of inputs including 4-20mA, thermocouple, RTD and voltage signals.
Signal converter with independent and isolated outputs which can be configured separately.
This slim unit can accept a range of inputs including 4-20mA and voltage signals. The unit produces an isolated high level DC output of either voltage or current.
This isolator accepts a mV signal from virtually any type of thermocouple and provides an identical isolated mV signal.
This unit is a Universal Strain Gauge transmitter. It will interface to the majority of strain gauges, load cells and pressure transducers.
The E-100 Ethernet Gateway module provides a straight forward method of interfacing analogue and digital process parameters to an Ethernet network.
The E-PORT Ethernet Gateway module provides a straight forward method of connecting almost any device with serial communications to a new or existing Ethernet.
The ISO-SLICE isolated Bus I/O system combines full three-port isolation with access to an industrial bus.
The E-BRIDGE wireless Ethernet cable replacement system provides a simple way extending the range of an Ethernet network without expensive wiring.
Switches include ports for copper and fibre and redundant ring configurations, remote monitoring of switch performance and ESD protection are all featured in these products.
This enables CAN bus data to be captured in real time and either logged using an RS232 data logger or to be made available on a Web site for remote logging and monitoring.
The Z-200 unit allows almost any number of analogue or digital input values to be wirelessly transmitted to a remote receiver with either analogue 4-20mA, 0-10V , Ethernet or RS232 outputs.
The Z-PORT Ethernet Gateway provides a link between ZigBee based wireless sensors and sensor networks and
The Z-HEAD universal input ZigBee transmitter can accept a wide range of inputs from most process measurement devices and transmits the measured variable to a 2.4GHz ZigBee receiver unit.
The Z-TEMP ambient temperature and humidity transmitter has been designed to operate with the range of ZigBee components manufactured by Industrial Interface.
The power supply is a mains input, DC output DIN rail mounted power supplies. A wide range (90 to 264Vac) as standard.
The power supply is a mains input, DC output DIN rail mounted power supplies. A wide range (85 to 264Vac) mains voltage input is standard with an output voltage of 24Vdc as standard.
The PSU range is a family of mains input, DC output DIN rail mounted power supplies. 115 and 230 Vac input options are available with an output voltage of 24Vdc as standard.
The unit is typically used to provide a clean, isolated 24Vdc auxiliary power supply for panel based systems. In this case the output 0V terminal can be left disconnected, using the output +ve and -ve instead.
The 20-ALM is a 4-20mA direct current loop powered trip amplifier. The device derives its power from the input signal and therefore requires no external power supply.